Hangzhou Linan Junjia Decorative Materials Co.,Ltd
Address: No.79,Tangwuli ,Shangquan Village, Linglong Industry Zone , Linan , Hangzhou , Zhejiang
Contact: Jessie Yang
First, when the melamine paper furniture varnish begins to operate, white embryos must first be processed to check whether the white embryos are smooth and smooth, with or without obvious unevenness and severe fiber hairs.
Second, after receiving the semi-finished products that have been processed in the previous process, they begin sealing the fibers with a closed primer. After the sealer is completely dry, it can be lightly ground to a smooth surface with old sandpaper, and then all the nail holes can be filled with the noticeable gaps such as sticks and seams. After the scraped putty ash is completely dried, it can be sanded. You can use a sand mill or a belt machine. All the flat workpieces must pass through the belt machine to ensure the flatness of the workpiece. The workpiece must be sanded. Smooth, smooth, no ash marks and grey drops, no fiber hairs and large sand marks.
third.After the melamine paper workers receive the workpieces from the grayworkers, they must check each other for any quality problems of the previous process, and then perform the processing. After the operation, it is necessary to carefully check whether there are offsets and smudges, and give strict protection. .
The above requirements must be familiar with the construction of melamine paper. The white embryo requirement of melamine paper is relatively strict, and it is precisely because of this that it can guarantee superior working results during subsequent use.