Hangzhou Linan Junjia Decorative Materials Co.,Ltd
Address: No.79,Tangwuli ,Shangquan Village, Linglong Industry Zone , Linan , Hangzhou , Zhejiang
Contact: Jessie Yang
The general melamine paper is paved on the relevant substrate, and in the paving for the substrate is also required, and this requirement mainly includes the following points:
First, the water content of the plate should be controlled within the 6%-10% range. Because the particleboard is outsourced, the change of the water content of the plate can be caused by the changing of the environment. If the water content is high, may cause the veneer process to appear the phenomenon of shooting, stratification and so on, if the water content is low, or impregnated paper volatile content is low, it may cause hot pressing surface can not very good wetting and produce paperboard delamination phenomenon.
Second, flat surface clean, do not allow water stains, grease, effective size can not have Chinben, gnawing first-class phenomenon.
Third, the thickness of the plate deviation should not exceed ±0.2mm, and sanding uniformity, do not allow leakage of sand phenomenon.